Advertisement
x
x
Put the brackets to one side and use the suction glass lifters to
21
remove the glass inline panel. Remove the horizontal inline
profile; unscrew and remove the vertical wall profile. Drill 7mm
holes where marked on the wall; insert Rawl plugs.
Run a bead of silicone along the base of the horizontal inline
23
profile, and reposition it on the tray or floor where marked; use
the 10mm spacer to ensure it is aligned with the vertical wall
profile and push the mitred ends together; tape into position.
Remove the 10mm spacer and apply a small amount of silicone
into the corner joint. Reinsert the noted rubber strips into the
horizontal inline profile.
x
x
The Majestic Shower Company Limited
One North Place, Edinburgh Way, Harlow Essex
CM20 2SL England,
Run a bead of silicone along the wall side of the vertical wall
22
profile, and screw it tightly into place. Loosely screw the glass-
to-wall brackets to the wall.
As shown, run beads of silicone along the inside of the vertical
24
wall profile and the horizontal inline profile only.
Telephone + 44 (0) 8448 001 500
Facsimile + 44 (0) 1279 635 074
info@majesticshowers.com www.majesticshowers.com
Fixed Panel
Fixed Panel
Hinge packer
Hinge packer
Advertisement
