Recycling Information; Technical Support; Limited Warranty - DIGITAL-LOGIC MICROSPACE MSMV104+ Technical User's Manual

DIGITAL-LOGIC AG
1.5

Recycling Information

Hardware:
- Print:
- Components:
Software:
- no problems:
1.6

Technical Support

1. Contact your local Digital-Logic Technical Support in your country.
2. Use Internet Support Request form on
3. Send a FAX or an E-mail to DIGITAL-LOGIC AG with a description of your problem.
DIGITAL-LOGIC AG
smartModule DesignIn Center
Nordstr. 11/F
CH-4542 Luterbach (SWITZERLAND)
Fax: ++41 32 681 58 01
E-Mail:
Internet
è Support requests will only be accepted with detailed informations about the product (BIOS-, Board-
version) !
1.7

Limited Warranty

DIGITAL-LOGIC AG warrants the hardware and software products it manufactures and produces to be
free from defects in materials and workmanship for one year following the date of shipment from
DIGITAL-LOGIC AG, Switzerland. This warranty is limited to the original purchaser of product and is not
transferable.
During the one year warranty period, DIGITAL-LOGIC AG will repair or replace, at its discretion, any
defective product or part at no additional charge, provided that the product is returned, shipping prepaid,
to DIGITAL-LOGIC AG. All replaced parts and products become property of DIGITAL-LOGIC AG.
Before returning any product for repair, customers are required to contact the company.
This limited warranty does not extend to any product which has been damaged as a result of accident,
misuse, abuse (such as use of incorrect input voltages, wrong cabling, wrong polarity, improper or
insufficient ventilation, failure to follow the operating instructions that are provided by DIGITAL-LOGIC AG
or other contingencies beyond the control of DIGITAL-LOGIC AG), wrong connection, wrong information
or as a result of service or modification by anyone other than DIGITAL-LOGIC AG. Neither, if the user has
not enough knowledge of these technologies or has not consulted the product manual or the technical
support of DIGITAL-LOGIC AG and therefore the product has been damaged.
Except, as expressly set forth above, no other warranties are expressed or implied, including, but not
limited to, any implied warranty of merchantability and fitness for a particular purpose, and DIGITAL-
LOGIC AG expressly disclaims all warranties not stated herein. Under no circumstances will DIGITAL-
LOGIC AG be liable to the purchaser or any user for any damage, including any incidental or
consequential damage, expenses, lost profits, lost savings, or other damages arising out of the use or
inability to use the product.
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
epoxy with glass fiber
wires are of tin-plated copper
ceramics and alloys of gold, silver
check your local electronic recycling
re-use the diskette after formatting
http://www.digitallogic.com
support@digitallogic.com
www.digitallogic.com
6
MSMV104+ manual V1.0
-> support