Demounting - PI P-725 Series User Manual

User Manual
P725T0010, applies to P-725
CBo/KSch, 8/27/2020

Demounting

NOTICE
Falling down when removing the thread adapters!
The P-725 could fall down while removing the upper thread adapter (microscope side) if it is
not secured or tightly screwed. The thread adapter and the objective screwed in could fall
down while removing the lower thread adapter (objective side).
 Secure all parts against falling down while removing the thread adapters:
- Screw the objective out before removing.
- Hold the P-725 firmly when you loosen the upper thread adapter.
 To demount the objective and the PIFOC positioner, reverse the steps as described in
"Installation" (p. 13).
Customer Service Department
For inquiries and orders, contact your PI sales representative or send us an email
(service@pi.de).
 If you have questions concerning your system, provide the following information:
− Product and serial numbers of all products in the system
− Firmware version of the controller (if applicable)
Version of the driver or the software (if applicable)
−
PC operating system (if applicable)
−
 If possible: Take photographs or make videos of your system that can be sent to our
customer service department if requested.
The current versions of the user manuals can be downloaded at www.pi.ws.
Physik Instrumente (PI ) GmbH & Co. KG, Auf der Roemerstrasse 1, 76228 Karlsruhe, Germany
Phone +49 721 4846-0, Fax +49 721 4846-1019, Email info@pi.de, www.pi.ws
Page 30 / 40