Pifoc long-travel objective scanner, pifoc piezo nanofocusing system for long travel ranges and fast step-and-settle, pifoc high dynamics scanner (40 pages)
Summary of Contents for PI P-726.1CD
Page 1
User Manual P726T0002, valid for P-726.1CD CBo, 10/18/2019 P-726.1CD PIFOC High-Load Objective Scanner Physik Instrumente (PI) GmbH & Co. KG, Auf der Roemerstrasse 1, 76228 Karlsruhe, Germany Phone +49 721 4846-0, Fax +49 721 4846-1019, Email info@pi.ws, www.pi.ws...
You need the product CD to get the access data. Physik Instrumente (PI) GmbH & Co. KG, Auf der Roemerstrasse 1, 76228 Karlsruhe, Germany Page 3 / 17 Phone +49 721 4846-0, Fax +49 721 4846-1019, Email info@pi.ws,...
Page 4
Click the desired manual and save it to the hard disk of your PC or to a data storage medium. Physik Instrumente (PI) GmbH & Co. KG, Auf der Roemerstrasse 1, 76228 Karlsruhe, Germany Page 4 / 17 Phone +49 721 4846-0, Fax +49 721 4846-1019, Email info@pi.ws,...
The intended use of the P-726 is only possible in a completely assembled and connected state. The P-726 must be operated with a suitable controller that is available from PI. The controller must provide the required operating voltages. To ensure proper performance of the servo- control system, the controller must also be able to read out and process the signals from the position sensors.
Page 6
Set the piezo voltage to 0 V on the controller. Physik Instrumente (PI) GmbH & Co. KG, Auf der Roemerstrasse 1, 76228 Karlsruhe, Germany Page 6 / 17 Phone +49 721 4846-0, Fax +49 721 4846-1019, Email info@pi.ws,...
Turret ring of the QuickLock adapter (to be ordered separately) Knurled ring Base body Connecting cable Physik Instrumente (PI) GmbH & Co. KG, Auf der Roemerstrasse 1, 76228 Karlsruhe, Germany Page 7 / 17 Phone +49 721 4846-0, Fax +49 721 4846-1019, Email info@pi.ws, www.pi.ws...
Follow the instructions in the manual of the piezo controller used for start-up and operation of the P-726. Physik Instrumente (PI) GmbH & Co. KG, Auf der Roemerstrasse 1, 76228 Karlsruhe, Germany Page 10 / 17 Phone +49 721 4846-0, Fax +49 721 4846-1019, Email info@pi.ws,...
CBo, 10/18/2019 Customer Service For inquiries and orders, contact your PI sales engineer or send us an email (info@pi.ws). If you have questions concerning your system, provide the following information: − Product and serial numbers of all products in the system −...
The heat generated by the piezo actuator during dynamic operation limits the value for maximum power consumption. Details can be found online: http://piceramic.com/piezo-technology/properties-piezo-actuators/electrical-operation.html Physik Instrumente (PI) GmbH & Co. KG, Auf der Roemerstrasse 1, 76228 Karlsruhe, Germany Page 13 / 17 Phone +49 721 4846-0, Fax +49 721 4846-1019, Email info@pi.ws, www.pi.ws...
(movable part of the capacitive sensor) The connector shell is connected to the cable shield. Physik Instrumente (PI) GmbH & Co. KG, Auf der Roemerstrasse 1, 76228 Karlsruhe, Germany Page 16 / 17 Phone +49 721 4846-0, Fax +49 721 4846-1019, Email info@pi.ws,...
Dispose of your old equipment according to international, national, and local rules and regulations. In order to fulfil its responsibility as the product manufacturer, Physik Instrumente (PI) GmbH & Co. KG undertakes environmentally correct disposal of all old PI equipment made available on the market after 13 August 2005 without charge.
Need help?
Do you have a question about the P-726.1CD and is the answer not in the manual?
Questions and answers