Table of Contents
Advertisement
10
Maintenance and repair
Test devices from Bosch Rexroth are maintenance-free.
▶
Regularly check the product and the connections, jacks and sockets for tight
fitting at the housing! Loose connections (sockets and connectors) can result in
malfunctions.
▶
Replace the seals at reasonable intervals as a precautionary measure.
Preventive maintenance as well as the adherence to pressure specifications
extend the service life of the test device including its accessories.
10.1 Cleaning and care
Ingress of contaminants and humidity!
Malfunction.
▶
Always ensure absolute cleanliness when working with the test device!
Solvents and aggressive cleaning agents!
Damage and accelerated aging of the housing.
▶
Do not use aggressive cleaning agents for cleaning.
Proceed as follow for cleaning and care:
▶
Carry out a visual inspection and check that all lines and connections fit
properly.
▶
Check all plug-in and clamping connections of the test device for correct fitting
and damage at least once a year.
▶
Inspect cables for rupture and crushes. Have damaged or defective cables
replaced immediately!
▶
Clean housing parts with a dry and dust-free cloth.
10.2 Repair
For safety reasons, unauthorized modification of the test device is not allowed!
Repairs may only be carried out by Bosch Rexroth AG. For repair and maintenance
work, send the device to the service address specified in chapter 16.1.
Devices returned to Bosch Rexroth for repair have to be shipped in the original
packaging, if possible.
10.3 Spare parts
At www.boschrexroth.com you can order spare parts for your service case
directly in the eShop.
When ordering spare parts, please state the material number of the relevant spare
parts.
At www.boschrexroth.com/en/xc/service/spare-parts/index you can have
spare parts listed that can be ordered and order them directly.
Maintenance and repair
NOTICE
RE 29681-B/11.2019; VT-SVTSY-1-1, Bosch Rexroth AG
23/28
Advertisement
Table of Contents
