Restrictions On Schedule Function - Hitachi MP-WU8101W User Manual

6. Restrictions on Schedule function

This model supports the Schedule function on the Projector Web Control feature.
(Network Guide
functions when Intellectual Stack with RS-232C connection is used. But for Simple
Stack without an RS-232C connection, there is no restriction on the functions.
Regardless of whether Intellectual Stack or Simple Stack is used, take note of the
Schedule settings before using the Stack function. Unexpected setting changes
may occur when using the Stack function.
Refer to the following for the restrictions concerning Intellectual Stack. If using
Simple Stack, skip this chapter.
Restrictions on the Main projector
Functions
Power
s t a t u s
Power On
Power Off
Input port change
My Image
Me s s e n g e r
Blank
Light Output
Restrictions on the Sub projector
Functions
Power
s t a t u s
Power On
Power Off
Input port change
My Image
Me s s e n g e r
Blank
Light Output
 : This Schedule can be input to Projector Web Control and be executed even if
the projectors are operating in Intellectual Stack.
(continued on next page)
→
3.1.7 Schedule
Ma i n
Sub
Ma i n
Sub
Settings) There are some restrictions on the
LIGHT MODE
DUAL ALTERNATE
ON ON
ON OFF
 
 
 * 1)  * 1)
 
 
 
 
LIGHT MODE
DUAL ALTERNATE
ON ON
ON OFF
X *3) X *3)
 
 * 1)  * 1)
X *2)

X *2)

X *2)

 
32
DUAL/
ALTERNATE
OFF OFF
ON OFF
 
 
 * 1)  * 1)
X *2) X *2)
X *2) X *2)
X *2) X *2)
 
DUAL/
ALTERNATE
OFF OFF
ON OFF
X *3) X *3)
 
 * 1)  * 1)
X *2)

X *2)

X *2)

 
QM00974-1