STACK menu settings
3.7 Important information for Intellectual Stack
● The Main and Sub projectors have the following common settings.
- AV MUTE
(Operating Guide
- Magnifying feature
- ASPECT and OVER SCAN
- COMPUTER IN
- OSD MESSAGE
- MY BUTTON
- TEMPLATE
(Operating Guide
- PbyP/PinP
(Operating Guide
● The following functions are disabled.
- STANDBY MODE
- AUTO SEARCH
- DIRECT POWER ON
- AUTO POWER ON
- AUTO POWER OFF
- COMMUNICATION TYPE
→ COMMUNICATION)
- SEARCH SKIP
● KEYLOCK operates according to the setting of the Main projector. The
KEYLOCK setting of the Sub projector is disabled.
● LAN port cannot be selected.
● When the projectors are in the PbyP/PinP mode, the SUB INPUT SOURCE is
fixed at FOLLOW MAIN UNIT.
● When Intellectual Stack is in use, an error message is displayed if an error
o c c u
r s o n a n y o f t h e p r o j e c t o r s .
When an error occurs, a full dialog is displayed on screen. The full dialog
changes to a small dialog after about 20 seconds without any key activity. While
the small dialog is displayed, pressing the ◄ button displays a full dialog again.
The numbers "1" and "2" above the projector icons
represent the Main and Sub projectors respectively.
Refer to the on-screen messages as shown below
and take the necessary actions to resolve the
problem.
(continued on next page)
(Operating Guide
(Operating Guide
(Operating Guide
(Operating Guide
(Operating Guide
(Operating Guide
(Operating Guide
(Operating Guide
(Operating Guide
(Operating Guide
(Operating Guide
(Operating Guide
(continued)
→
Temporarily turning off the screen and
→
Using the magnify
→
INPUT
menu)
→
SETUP
→
OPTION
menu)
→
SCREEN
menu)
→ PbyP/PinP)
→
SETUP
→
OPTION
→
OPTION
→
OPTION
→
OPTION
→
OPTION
22
feature)
→
IMAGE
menu)
menu)
menu)
menu)
menu)
menu)
menu)
→
OPTION menu
menu)
Full dialog
audio)
→
SERVICE
Small dialog
QM00974-1