Description - Lutron Electronics PALLADIOM Configuration Manual

Table of Contents

Advertisement

Description

This programming guide provides information on how to configure the HomeWorks QS Palladiom Thermostat and
HomeWorks QS Palladiom HVAC controller (SMC55-HWQS, SMC55-RESI). All the references made to SMC55-HWQS
throughout the document will apply to SMC55-RESI as well.
The HomeWorks QS Palladiom thermostat and SMC55-HWQS are a two-piece solution offered by Lutron to control HVAC
equipment. The thermostat provides the user interface and the SMC55-HWQS sends signals to control the HVAC equipment.
The SMC55-HWQS must be configured correctly to control the HVAC equipment. The thermostat can also connect to third-party
HVAC controllers, or be used as a Companion Thermostat, which is described in later sections.
Shock Hazard - Improper configuration can cause property damage, personal injury, or death. Installation and
WARNING
service must be performed by a licensed professional HVAC installer (or equivalent) or service agency.
This guide illustrates multiple steps for configuring the Palladiom thermostat and HVAC controller.
Step 1
illustrates how to identify the HVAC equipment and confirm system compatibility.
Step 2
covers the equipment configuration mode.
explains the controller selection menu.
Step 3
Step 4
details the basic parameters required to configure the SMC55-HWQS for compatibility.
Step 5
covers the details of the advanced parameters for the SMC55-HWQS which are used to modify the functionality of the
HVAC equipment. Advanced parameters are set to a default value and should only be changed if the system needs further
configuration.
After configuring both the basic and the advanced parameters, refer to Step 6
on the configuration of the SMC55-HWQS.
Appendix A
includes control diagrams to explain the On/Off deltas for heating and cooling stages.
Appendix B
provides a worksheet which should be kept and used by the installer during installation. Before configuring the
SMC55-HWQS, write the necessary values for the basic and advanced parameters in the allotted space.
gives more details about the functionality of different buttons and user interface on the thermostat.
Appendix C
to verify the basic system functionality based
4
P/N 032498h

Advertisement

Table of Contents
loading

Table of Contents