Table of Contents
Advertisement
Table 1-8
System Error Messages (continued)
Message
Memory Error at:
MMMM:SSSS:OOO (W:XXXX,
R:YYYY)
where:
M: MB, S: Segment, O: Offset,
X/Y: write/read pattern
Memory Size Mismatch
CPU Clock Mismatch
Onboard Serial Port 1 Conflict
Onboard Serial Port 2 Conflict
Onboard Parallel Port Conflict
Pointing Device Error
Pointing Device Interface Error
Press F1 key to continue or
Ctrl-Alt-Esc for Setup
Real Time Clock Error
Press Esc to turn off NMI, any
key to reboot
Real-time Clock Error
1-30
Action
Check DIMMs on the system board.
Contact your dealer.
Check the memory size based on the
system specifications. Check the
internal cable connections. If you
are sure that connections and values
are correct, ignore the message. If
the message reappears, ask for
technical assistance.
Run Setup and disable the port.
Run Setup and disable the port.
Run Setup and disable the port.
Check and connect pointing device.
Replace the pointing device or
contact your dealer.
Press
or
+
+
to enter Setup.
Run Setup and set the time and date.
Press
to disregard the NMI
error.
Press any other key to reboot the
system.
Run Setup.
User's Guide
Advertisement
Table of Contents
