Table of Contents
Advertisement
12-3-8 Panel Module Removal
1
1
1) .Remove the four silver screw around the PANEL corner (1).
2).Remove all the aluminum foil around the panel (2), after assemble the new panel, must re-affix the
aluminum foil, if it's broken must change a new one, otherwise, the EMI can be affected.
3). Two people hold the panel holder 1 and 2 respectively, then uplift the panel module and move it out
form the front cover(Bezel), and store in a safe place.
Page 76 of 99
1
1
Advertisement
Table of Contents
