Disassembly And Assembly; Pdp Stand Removal - Acer AT4202P Service Manual

12-3 Disassembly and assembly

12-3-1 PDP stand removal

3
1) Unplug the AC power and all signal cables.
2) Place the PDP upside down on a tabletop (use a protection sheet or EPE bag), Take care, that this
is flat and free from obstacles like screws, to prevent damaging the fragile PDP glass filter (1).
3) Remove the four black colored screws around the stand holder (2).
4) Remove the Base assembly from PDP as the direction arrowhead showed (3).
Page 70 of 99
1
2