Table of Contents
Advertisement
12-3-2 Back Cover Removal
1). Remove the six big black colored screws in the panel holder as the red-circle showed (1).
2) .Remove the eleven black colored screws around the terminals as the green-pane showed (2).
3) .Remove the twerty-nine black colored screws around the back cover as the blue-pane showed (3).
4) .Carefully prize up the back cover from the left of the PDP (5).
5) .Carefully remove the Back Cover from the top of the PDP, and store in a safe place.
3
1
2
Page 71 of 99
Advertisement
Table of Contents
