Table of Contents
Advertisement
Child Lock: On/ Off lock. Select ON , lock the keypad, at the same time the screen is be blanked,
you must input your password.
Change Password: Need password to change settings,initial Default password is:888888
Press Menu button to display the menu, use "▲▼ " to select an item. Press "►" or "Enter" to adust the
value of the selected item. Press Exit to return to the previous level menu and press Menu again to exit
the menu.
3-3-7 Screen Menu
Auto Config.: Auto adjust the H/V position,H/V size and the phase.
Manual Config.: Manual adjust phase clock and H/V position.
(The above two functions are enabled only when D-SUB.DVI input is used).
ARC: Adjust display ratio(VGA、DVI、 component1/2 are not enabled.
Cinema: ON/OFF 3:2 pull down mode.
NR: Noise reduce adjust 0 1 2 step.
Reset: Reset default value about the H/V position,H/V size and the phase(just be used
at D-SUB,DVI source.)
Press Menu button to display the menu, use "▲▼ " to select an item. Press "►" or "Enter" to adust the
value of the selected item. Press Exit to return to the previous level menu and press Menu again to exit
the menu.
Page 22 of 99
Advertisement
Table of Contents
