Acer AT4202P Service Manual page 19

● Storage:the saved serial number of the programme.
● Sound System: Preset TV sound system: D/K、I、B/G 、or L。
● Cable or Air: switch signal among V/UHF、cable.
● Channel No.: to set serial numbers for programs.
●
Color System: to select color systems for programs:Auto
● Manual Search: to manually search a new channel, the current channel will be overwritten by the
searched new channel.
Press Menu button to display the main menu, use"CH+/ CH -" to select a channel. Press "►" or
"Enter"to enter the next level menu, and
"Enter" to start manual searching.
● Fine: to finely tune the current channel to get better images.
● Name:Channel name.
Programme Edit： Press"►" or "Enter"to
Display "To Set",press
"Enter"into edit. see the
right picture.(Press Red
button on remote control
to delete. Press Green
button to Copy. Press
Yellow button to Move.
Press cyan button to skip
Favourite Prog.：Press "►" or "Enter"enter
Favorite Menu or Press the
"FAVORITE" button on the
remote control.preset you
the favorite channel number,
press"Enter"to storage.
Press Menu button to display the menu, use "▲▼ " to select an item. Press "►" or "Enter" to adjust the
value of the selected item. Press Exit to return to the previous level menu and press Menu again to exit the
menu.
use "CH+/ CH -" to select "Manual Search", then press "►" or
Page 19 of 99
Deleted: use "
Deleted: use "