11、Check and Measure
11-1 Image board
Test the power of each chip with the universal meter, to ground impedance and earth
situation.
11-1-1 Power Check and Measure
A
B
C
D
Supply with getting red arrow point A/B/C/D that identification come out for power, image of board with the
interface among having picture, it corresponding power make detection method separately among following
several picture.
①. In the following tht picture it is successively 1pin to 5 pin of CN121 from left to right, Among them, 1pin
connect 6V voltage and 3pin connect 12V;2pin and 4pin connect power,5pin no connect.
NOTICE:This Picture For SDI Panel Power
Page 64 of 99