Product Description; Product Overview - Xylem e-MP Manual

3 Product Description

3 Product Description

3.1 Product overview

The pump is a multistage centrifugal ring section pump with suction impeller for low NPSH
value.
Intended use
• Water supply and water treatment
• Cooling and hot water supply in industries and building services
• Irrigation and sprinkler systems
• Heating systems
• Snow making applications
• Nano filtrations
• Boiler feed
Improper use
WARNING:
Improper use of the pump may create dangerous conditions and cause personal injury and
damage to property.
An improper use of the product leads to the loss of the warranty.
Examples of improper use:
• Liquids not compatible with the pump construction materials
• Hazardous liquids (such as toxic, explosive, flammable, or corrosive liquids)
• Potable liquids other than water (for example, wine or milk)
Examples of improper installation:
• Hazardous locations (such as explosive, or corrosive atmospheres).
• Location where the air temperature is very high or there is poor ventilation.
• Outdoor installations where there is no protection against rain or freezing temperatures.
DANGER:
Do not use this pump to handle flammable and/or explosive liquids.
NOTICE:
• Do not use the pump for flow rates beyond the specified flow rates on the data sheet or
Order Acknowledgement.
For more information, see
• Do not use this pump to handle liquids containing abrasive, solid, or fibrous substances.
Special applications
Contact the local sales and service representative in the following cases:
• If the density or viscosity value of the pumped liquid exceeds the value of water, such as
water with glycol; as it may require a more powerful motor.
• If the pumped liquid is chemically treated (for example softened, deionized,
demineralized etc.).
• Any situation that is different from the ones that is described and relate to the nature of
the liquid.
16
Limits of operation
on page 60.
e-MP Instruction manual