Table of Contents
Advertisement
1 Open the suction grille.
Standard panel:
Design panel:
2 Remove the air filter.
Standard panel:
1
Design panel:
1
3 Clean the air filter. Use a vacuum cleaner or wash with water. If
the air filter is very dirty, use a soft brush and neutral detergent.
4 Dry the air filter in the shadow.
5 Reattach the air filter and close the suction grille.
6 Turn ON the power.
7 To remove warning screens, see the reference guide of the
user interface.
7.2.2
To clean the suction grille
NOTICE
Do NOT use water of 50°C or higher. Possible
consequence: Discoloration and deformation.
1 Open the suction grille.
FXFA20~125A2VEB
VRV system air conditioner
3P599604-1C – 2020.10
2 Remove the suction grille.
3
3
3 Remove the air filter.
4 Clean the suction grille. Wash with a soft bristle brush, and
water or neutral detergent. If the suction grille is very dirty, use
a typical kitchen cleaner, leave it on for 10 min, then wash it
with water.
5 Reattach the air filter (step 3 in reverse order).
6 Reattach the suction grille and close it (step 2 and 1 in reverse
order).
7.2.3
WARNING
Do
consequence: Electric shock or fire.
7 Maintenance and service
Standard panel:
Design panel:
Standard panel:
1
Design panel:
2
1
To clean the air outlet and outside panels
NOT
let
the
indoor
unit
Installation and operation manual
2
45°
3
get
wet.
Possible
11
Advertisement
Table of Contents
