26
3
Partial, scrolling
or incorrectly
displayed image
(For notebooks)
4
The screen of the
notebook
computer is not
displaying your
presentation
5
Image is unstable
or flickering
6
Image has vertical
flickering bar
7
Image is out of
focus
•
Press "RESYNC" on the remote control or control
panel.
•
For an incorrectly displayed image:
•
Follow the steps for item 2 (above) to adjust
the resolution of your computer.
•
Press the respective button to toggle output
settings. Example: [Fn]+[F4], Compaq
[Fn]+[F4], Dell [Fn]+[F8], Gateway [Fn]+[F4],
IBM [Fn]+[F7], HP [Fn]+[F4], NEC [Fn]+[F3],
Toshiba [Fn]+[F5]
•
If you experience difficulty changing resolutions or
your monitor freezes, restart all equipment
including the projector.
•
If you are using a Microsoft
notebook: Some notebook PCs may deactivate their
own screens when a second display device is in use.
Each has a different way to be reactivated. Refer to
your computer's manual for detailed information.
•
If you are using an Apple
notebook: In System Preferences, open Display and
select Video Mirroring "On".
•
Use "Tracking" to correct it. Refer to the "Image
Setting" section for more information.
•
Change the display color depth settings on your
computer.
•
Use "Frequency" to make an adjustment. Refer to
the "Image Setting" section for more information.
•
Check and reconfigure the display mode of your
graphics card to make it compatible with the
projector.
•
Make sure the lens door is slid on.
•
Adjusts the focus ring on the projector lens.
•
Make sure the projection screen is within the
required distance of 3.3 to 39.4 feet (1.0 to 12.0
meters) from the projector. Refer to the "How to
Get a Preferred Image Size by Adjusting Distance
and Zoom" section for more information.
®
®
Windows
based
®
®
Mac
OS based
Need help?
Do you have a question about the P1165E Series and is the answer not in the manual?