Press "MENU" to launch the onscreen (OSD) menu, back
to the previous step for the OSD menu operation or exit
the OSD menu.
Confirm your selection of items.
For computer mode only. Use this button to select the next or
previous page. This function is only available when connected
to a computer via a USB cable.
Toggle "RGB" to adjust the red/green/blue color.
Press "BRIGHTNESS" to adjust the brightness of the image.
Use the "CONTRAST" option to control the difference
between the lightest and darkest parts of the picture.
Press "COLOR" to adjust the color temperature of image.
Press "VGA" to change source to the VGA connector. This
connector supports analog RGB, YPbPr (480p/576p/720p/
1080i), YCbCr (480i/576i) and RGBsync.
Press "COMPONENT" to change source to Component video.
This connection supports YPbPr (480p/576p/720p/1080i) and
To change source to S-Video.
To change source to COMPOSITE VIDEO.
Press "DVI" to change source to DVI. This connection supports
digital RGB, analog RGB, YPbPr (480p/576p/720p/1080i),
YCbCr (480i/576i) and HDCP signals.
Change the video source to HDMI™. (for model if with the
To turn on/off the volume.
This function is not available for this model.
Press "0~9" to input a password in the "Security settings".