Acer P1165E Series User Manual page 34

22
User Password
•
•
•
•
•
•
•
Administrator Password
The "Administrator Password" can be used by both "Enter
Administrator Password" and "Enter Password" dialog boxes.
•
•
If you forgot your administrator password, do the following to
retrieve the administrator Password:
•
•
Lock User Startup Screen
•
Reset
•
Press to setup or change the "User Password".
Press number keys to set your password on the remote control
and press "MENU" to confirm.
Press to delete character.
Enter the password when you see "Confirm Password"
displayed.
The password should be between 4 and 8 characters long.
If you select "Request password only after plugging power
cord", the projector will prompt the user to enter the
password every time the power cord is plugged.
If you select "Always request password while projector turns
on", the user has to enter the password every time when the
projector is turned on.
Press to change the "Administrator Password".
The factory default of "Administrator Password" is "1234".
An unique 6-digit "Universal Password" which is printed on
the Security Card (please check accessory in the box). This
unique password is the number wihch will be accepted by
projector anytime no matter what the Administaror Password
is.
If losing this securiy card and number, please contact with an
Acer service center.
Default Lock User Startup Screen is "Off". If lock user startup
screen is "On", users cannot change the startup screen
anymore and avoid the other users change that arbitrarily.
Choose "Off" to unlock startup screen.
Press after choosing "Yes" to return the parameters on
all menus to the factory default settings.