Turning the Projector On/Off
Turning On the Projector
Slide on the lens door.
Ensure that the power cord and signal cable are securely connected. The
Power LED will flash red.
Turn on the lamp by pressing "Power" button on the control panel, and
the Power LED will turn blue.
Turn on your source (computer, notebook, video player ,etc.). The
projector will detect your source automatically.
If the screen displays "Lock" & "Source" icons, it means the projector
locks on this source type and there is no such type of input signal
If the screen displays "No Signal", please make sure the signal cables
are securely connected.
If you connect multiple sources at the same time, using the "Source"
button on either control panel or the remote control or direct source
key on the remote control to switch between inputs.