Advertisement
Adjusting the Picture on the Screen
4
Press the √ or ◊ button to select the item you want to adjust, and press
the ı or ∫ button to adjust it.
COLOR : 31
HUE : 31
>
SHARPNESS : 10
Adjustment item
COLOR
HUE
SHARPNESS
5
Press the ENTER button.
"SAVE" is displayed for about one second, and the adjusted level is
stored in the memory.
Repeat steps 4 and 5 to adjust each item.
6
To finish the adjustment, press the MENU button repeatedly until the
normal display appears in the display window.
Notes
• After adjusting the picture in step 4 above, do not move the cursor to
another item or press the MENU button before pressing the ENTER
button. If you do, the adjusted level is not stored in the memory.
• The hue cannot be adjusted for the picture input from PAL color sources.
In this case, "HUE: – –" appears.
28
Operation
Adjusted value
How to adjust
Pressing the ∫ button increases the color intensity;
pressing the ı button decreases the color intensity.
Adjustable range is 0 – 63.
Pressing the ∫ button makes the skin tones greener;
pressing the ı button makes the skin tones purpler.
Adjustable range is 0 – 63.
Pressing the ∫ button makes the picture sharper;
pressing the ı button makes the picture softer.
Adjustable range is 0 – 15.
Controlling the Equipment Connected to the ICU
Using the UTILITY button on the ICU controller, you can control the
power on/off or other functions of the equipment connected to the
EXTERNAL CONTROL connector of the ICU.
UTILITY button
Hold down the UTILITY button for more than a second to make contact.
The UTILITY button lights.
Hold down the button again to break contact. The UTILITY button goes
out.
29
Operation
Advertisement
