Advertisement
Connections
Turn off the power to all equipment when making the connections.
Check that the connectors are fully inserted before using.
JumboTron system configuration
JME-SA200 screen
Cellular phone
alignment controller
Public telephone line
Digital data
card
Modem
EXTERNAL
COM 2
CONTROL
to power
distribution panel
CONTROL 1
AC IN
to 100 - 240 V AC
JTC-C200 ICU controller
COM 1
JTA-LS200
ABC sensor unit
Computer
IN
Video camera
AV switcher
VCR, etc.
Interface board
Computer
14
Connections
Overview
JumboTron screen
Unit 2 - 47
Unit 1
Unit 48
CONTROL
2 or 3
JTC-P200
IN
ICU
OUT
CONTROL 1/LS
AC IN
EXTERNAL
CONTROL
NPUT 1 (R/R-Y, G/Y, B/B-Y,
HD/COMP, VD) or VIDEO IN
to 100 - 240 V AC
INPUT 2 (R, G, B, HD/COMP, VD)
MONITOR OUT
to equipment to be controlled
with the JTC-C200, such as
power distribution panel
to video input
Video monitor
Setting the ID number of the JTC-C200 ICU controller
When two or more JTC-C200 ICU controllers are used in the JumboTron
system, set the individual ID number on each ICU controller with the ID
selector on the rear panel. If the same ID number is set on two or more
ICU controllers, the system does not operate correctly.
ID selector
15
Table of Contents
Connections
Advertisement
