Download Print this page

Sony JumboTron JTC-C200 Service Manual page 18

Icu controller
Hide thumbs Also See for JumboTron JTC-C200:

Advertisement

Adjusting the Brightness of the Screen
4
Press the √ or ◊ button to select PRESET, and press the ENTER
button.
The preset menu appears.
>
BRIGHTNESS
GEOMETRY
5
Press the √ or ◊ button to select BRIGHTNESS, and press the ENTER
button.
The brightness preset menu appears.
>
PRESET-1 :
PRESET-2 :
PRESET-3 :
PRESET-4 : 16
6
Press the √ or ◊ button to select the preset number, and press the ı or
∫ button to adjust the brightness level.
The brightness level is adjustable in a range of 1 – 16. The higher the
level is, the brighter the screen becomes.
PRESET-1 :
>
PRESET-2 :
PRESET-3 :
PRESET-4 : 16
7
Press the ENTER button.
"SAVE" is displayed for about one second, and the adjusted level is
stored in the memory.
Repeat steps 6 and 7 to store up to four different brightness levels in
the PRESET 1 to PRESET 4 numbers.
8
To finish the brightness adjustment, press the MENU button repeatedly
until the normal display appears in the display window.
Note
After adjusting the brightness in step 6 above, do not move the cursor to
another preset number or press the MENU button before pressing the
ENTER button. If you do, the adjusted level is not stored in the memory.
To set to the preset brightness level
See "Selecting the brightness of the screen" on page 19.
26
Operation
1
4
8
Adjusted brightness level
1
6
8
Adjusting the Picture on the Screen
When the composite video signal is displayed on the screen, you can adjust
the color, hue and sharpness of the picture.
When the component video signal is displayed, you can adjust the color
and sharpness only.
1
When the display window shows the normal display, press the MENU
button.
The main menu appears.
>
SIGNAL CTRL
GEOMETRY CTRL
MONITOR CTRL
SCREEN CTRL
2
Press the √ or ◊ button to move the cursor (>) to SIGNAL CTRL
(signal control), and press the ENTER button.
The SIGNAL CTRL submenu appears.
>
INPUT-1
INPUT-1
INPUT-1
3
Press the √ or ◊ button to select INPUT-1 PICTURE, and press the
ENTER button.
The picture adjustment menu appears.
COLOR : 31
>
HUE : 31
SHARPNESS :
MENU button
ENTER button
◊/√/ı/∫ buttons
SWITCHER CTRL
OTHER CTRL
INFO
INPUT-2
INFO
PICTURE
INPUT-2
OTHER
OTHER
7
(continued)
27
Operation

Advertisement

loading