Table of Contents
Advertisement
A
B
Connecting to audio L/R input
Connecting to a digital audio
jacks
input jack
This connection will use your TV’s or stereo
If your AV amplifier (receiver) has a Dolby
1
2
amplifier’s (receiver’s) two speakers for
Digital*
, DTS*
, or MPEG audio decoder
sound. Connect using the audio/video cord
and a digital input jack, use this connection.
(supplied).
Connect using a coaxial or optical digital cord
(not supplied).
Yellow
Yellow
Coaxial cord
White (L)
White (L)
Red (R)
Red (R)
Optical cord
• Surround effect
• Surround effect (page 40)
Dolby Digital (5.1ch), DTS (5.1ch), MPEG
TV: Dynamic Theatre, Dynamic, Wide,
audio (5.1ch)
Night
*1
Manufactured under license from Dolby
Stereo amplifier (receiver): Standard, Night
Laboratories.
“Dolby,” “Pro Logic,” and the double-D symbol
are trademarks of Dolby Laboratories.
*2
“DTS” and “DTS Digital Out” are trademarks of
Digital Theater Systems, Inc.
Notes
• After you have completed the connection, make
the appropriate settings in Quick Setup (page 20).
If your AV amplifier (receiver) has an MPEG
audio decoder function, set “MPEG” to “MPEG”
in AUDIO SETUP (page 67). Otherwise, no
sound or a loud noise will come from your
speakers.
• The TVS effects of this player cannot be used
with this connection.
• In order to listen to DTS sound tracks, you must
use this connection. DTS sound tracks are not
output through the LINE OUT L/R (AUDIO)
jacks, even if you set “DTS” to “ON” in Quick
Setup (page 20).
19
6
10
Press X/x to select the type of
Press ENTER.
Dolby Digital signal you wish to
The Setup Display for selecting the
aspect ratio of the TV to be connected
send to your amplifier (receiver).
appears.
If your AV amplifier (receiver) has a
Dolby Digital decoder, select “DOLBY
SCREEN SETUP
16:9
TV TYPE:
DIGITAL.” Otherwise, select “D-PCM.”
16:9
COLOR SYSTEM (VIDEO CD):
SCREEN SAVER:
4:3 LETTER BOX
4:3 PAN SCAN
BACKGROUND:
AUDIO SETUP
FULL
4:3 OUTPUT:
AUDIO ATT:
OFF
AUDIO DRC:
STANDARD
DOWNMIX:
DOLBY SURROUND
DIGITAL OUT:
ON
DOLBY DIGITAL:
D-PCM
MPEG:
D-PCM
DTS:
DOLBY DIGITAL
7
Press X/x to select the setting that
48kHz/96kHz PCM:
48kHz/16bit
matches your TV type.
11
Press ENTER.
◆ If you have a wide-screen TV or a 4:3
standard TV with a wide-screen mode
“DTS” is selected.
• 16:9 (page 63)
◆ If you have a 4:3 standard TV
AUDIO SETUP
AUDIO ATT:
OFF
• 4:3 LETTER BOX or 4:3 PAN SCAN
AUDIO DRC:
STANDARD
DOWNMIX:
DOLBY SURROUND
(page 63)
DIGITAL OUT:
ON
DOLBY DIGITAL:
D-PCM
8
MPEG:
PCM
Press ENTER.
DTS:
OFF
48kHz/96kHz PCM:
OFF
The Setup Display for selecting the type
ON
of jack used to connect your amplifier
(receiver) appears.
12
Press X/x to select whether or
not you wish to send a DTS signal
Is this player connected to an amplifier
(receiver) ? Select the type of jack you
to your amplifier (receiver).
are using.
YES
If your AV amplifier (receiver) has a
LINE OUTPUT L/R (AUDIO)
DIGITAL OUTPUT
DTS decoder, select “ON.” Otherwise,
NO
select “OFF.”
9
13
Press X/x to select the type of jack
Press ENTER.
(if any) you are using to connect to
Quick Setup is finished and connections
are complete.
an amplifier (receiver), then press
If your AV amplifier (receiver) has an
ENTER.
MPEG audio decoder, set “MPEG” to
“MPEG” (page 67).
If you did not connect an AV amplifier
(receiver), select “NO,” then go to step
13.
If you connected an AV amplifier
(receiver) using just an audio cord, select
“YES: LINE OUTPUT L/R (AUDIO),”
then go to step 13.
If you connected an AV amplifier
(receiver) using either a digital optical or
coaxial cord, select “YES: DIGITAL
OUTPUT.”
21
DVP-NS36/NS37/NS45P/NS55P/NS61P/NS63P
Step 5: Connecting the Mains Lead
Plug the player and TV mains lead (power cord) into a mains.
Step 6: Quick Setup
Follow the steps below to make the minimum number of basic adjustments for using the player.
To skip an adjustment, press >. To return to the previous adjustment, press .. The on-
screen displays differ depending on the player model. Oceanian model is used for illustration
unless otherwise specified.
ENTER
1
4
Turn on the TV.
Press ENTER without inserting a
disc.
2
Press [/1.
The Setup Display for selecting the
language used in the on-screen display
3
Switch the input selector on your
appears.
The available languages differ depending
TV so that the signal from the
upon the player model.
player appears on the TV screen.
LANGUAGE SETUP
“Press [ENTER] to run QUICK SETUP”
OSD:
ENGLISH
(press enter to run Quick Setup) appears
MENU:
ENGLISH
AUDIO:
at the bottom of the screen. If this
FRANÇAIS
SUBTITLE:
DEUTSCH
message does not appear, select
ITALIANO
“QUICK” (quick) under “SETUP”
ESPAÑOL
NEDERLANDS
(setup) in the Control Menu to run Quick
DANSK
Setup (page 62).
SVENSKA
5
Press X/x to select a language.
The player displays the menu and
subtitles in the selected language.
20
Playing Discs
Playing Discs
Playback side facing down
Depending on the DVD or VIDEO CD, some
5
operations may be different or restricted.
Press H.
Refer to the operating instructions supplied
with your disc.
The disc tray closes. The player starts
playback (continuous play). Adjust the
volume on the TV or the amplifier
(receiver).
Depending on the disc, a menu may
appear on the TV screen. For DVD
VIDEOs, see page 25. For VIDEO CDs,
see page 26.
To turn off the player
Press [/1. The player enters standby mode.
z Hint
You can have the player turn off automatically
ENTER
whenever you leave it in stop mode for more than
30 minutes. To turn this function on or off, set
RETURN
“AUTO POWER OFF” in “CUSTOM SETUP” to
“ON” or “OFF” (page 64).
Note
Discs created on DVD recorders must be correctly
finalized before they can be played. For more
information about finalizing, refer to the operating
1
instructions supplied with the DVD recorder.
Turn on your TV.
Notes on playing DTS sound tracks on a
2
Press [/1.
DVD VIDEO
• DTS audio signals are output only through
The player turns on.
the DIGITAL OUT (COAXIAL or
3
Switch the input selector on your
OPTICAL) jack.
• When you play a DVD VIDEO with DTS
TV so that the signal from the
sound tracks, set “DTS” to “ON” in
player appears on the TV screen.
“AUDIO SETUP” (page 67).
• If you connect the player to audio
◆ When using an amplifier (receiver)
equipment without a DTS decoder, do not
Turn on the amplifier (receiver) and
set “DTS” to “ON” in “AUDIO SETUP”
select the appropriate channel so that you
(page 67). A loud noise may come out from
can hear sound from the player.
the speakers, affecting your ears or causing
4
the speakers to be damaged.
Press A on the player, and place a
disc on the disc tray.
22
1-5
Hide quick links:
Advertisement
Table of Contents
