Sony STR-DN1080 Service Manual page 43

13. Factory Initialize (Factory Settings)
Return all of the unit setting to their factory defaults.
(When the initialize is completed, the power turns off automati-
cally)
Operation:
[ ] Executes the initialize
[BACK] Returns to the top menu of the service mode
Factory Initialize
[ENT] Start Initialize
[RET] Return to Top Menu
HELP : [ENT] [RET]
14. Network (Network Test Diagnosis)
Note: Not used in this unit.
15. Version UP
Note: Not used for the servicing.
STR-DN1080/ZA810ES
16. System Information (System Information Display)
This screen displays system information.
Screen 1: Basic Information
Operation:
[b] Drive information and wireless device information
displayed (go to Screen 2)
[BACK] Returns to the top menu of the service mode
Screen 2: Drive and Wireless Information Menu
Operation:
[B] Basic Information displayed (go to Screen 1)
[BACK] Returns to the top menu of the service mode
For drive not equipped, information of drive does not appear.
(Screen 1)
System Information
Main LSIname:
Model:
Destination:
Sequence Number:
MAC:
IP:
IF-con Main Version:
IFCon ADSP Coeff Version:
Bootloader Version:
Host Main Version:
MicroBE Version:
Host Sub Version:
Middleware Version:
ADSP Version:
ADSP Coeff Version:
2nd DSP Version:
ADSP Version:
HELP: [RET] [RIGHT]
(Screen 2)
System Information
IF_MODEL:
IF_DEST:
WLAN module Serial:
WLAN module hw version:
WLAN module MAC Address:
Drive Firm Revision:
Bluetooth Device Address::
HELP: [RET] [LEFT]
17. EMC Test Mode
Note: Not used for the servicing.
18. Drive
Note: Not used in this unit.
19. HDD Mode
Note: Not used in this unit.
20. RF TEST MODE
Note: Not used for the servicing.
Sub Version :
43
SYS SET