Sony STR-DN1080 Service Manual page 2

STR-DN1080/ZA810ES
(STR-DN1080)
Playable types of audio files
Codec
1)
MP3 (MPEG 1 Audio Layer-3)
1), 2)
AAC/HE-AAC
2)
WMA9 Standard
3), 4)
WMA 10 Pro
1)
LPCM
2)
FLAC
1), 3)
Dolby Digital
2)
DSF
2), 5)
DSDIFF
2)
AIFF
2)
ALAC
Vorbis
Monkey's Audio
1)
The receiver can play ".mka" files. These files cannot be played on a home network server.
2)
The receiver may not play this file format on a home network server.
3)
The receiver does not play this file format on a home network server.
4)
The receiver does not play Lossless coded files.
5)
The receiver does not play DST encoded files.
Note
Some files may not play depending on the file format, the file encoding, the recording condition, or the home
network server condition.
Some files edited on a PC may not play.
Fast forward or fast reverse may not be available with some files.
The receiver does not play coded files such as DRM.
The receiver can recognize the following files or folders in USB devices:
up to folders in the 9th layer (including the root folder)
up to 500 files/folders in a single layer
The receiver can recognize the following files or folders stored in the home network server:
up to folders in the 19th layer
up to 999 files/folders in a single layer
Some USB devices may not work with this receiver.
The receiver can recognize Mass Storage Class (MSC) devices (such as flash drive or an HDD) and 101-key
keyboards.
Supported video formats
Format 2D
Frame packing Side-by-Side (Half) Over-Under (Top-and-Bottom)
4096 × 2160p @ 59.94/60 Hz (*1) -
4096 × 2160p @ 50 Hz (*1) -
4096 × 2160p @ 29.97/30 Hz (*2) -
4096 × 2160p @ 25 Hz (*2) -
4096 × 2160p @ 23.98/24 Hz (*2) -
3840 × 2160p @ 59.94/60 Hz (*1) -
3840 × 2160p @ 50 Hz (*1) -
3840 × 2160p @ 29.97/30 Hz (*2) -
3840 × 2160p @ 25 Hz (*2) -
3840 × 2160p @ 23.98/24 Hz (*2) -
1920 × 1080p @ 59.94/60 Hz -
1920 × 1080p @ 50 Hz -
1920 × 1080p @ 29.97/30 Hz
1920 × 1080p @ 25 Hz
1920 × 1080p @ 23.98/24 Hz
1920 × 1080i @ 59.94/60 Hz
1920 × 1080i @ 50 Hz
1280 × 720p @ 59.94/60 Hz
1280 × 720p @ 50 Hz
1280 × 720p @ 29.97/30 Hz
1280 × 720p @ 23.98/24 Hz
720 × 480p @ 59.94/60 Hz -
720 × 576p @ 50 Hz -
640 × 480p @ 59.94/60 Hz -
*1 If you use YCbCr 4:4:4/YCbCr 4:2:2/RGB 4:4:4 or YCbCr 4:2:0 Deep Color (Deep Colour) (10 bit or 12 bit) of these video formats, we
recommend you to use Premium High Speed HDMI Cables with Ethernet that support 18 Gbps and be sure to set [HDMI Signal Format] to
[Enhanced format] in the [HDMI Settings] menu.
*2 If you use Deep Color (Deep Colour) (10 bit or 12 bit) of these video formats, we recommend you to use Premium High Speed HDMI
Cables with Ethernet that support 18 Gbps and be sure to set the [HDMI Signal Format] to [Enhanced format] in the [HDMI Settings] menu.
Note
Depending on the TV or video device, 4K or 3D content may not be displayed. Check the HDMI video formats
supported by the receiver.
When you connect two TVs to the receiver, Dolby Vision content may not be displayed.
Refer to the operating instructions of each connected device for details.
2
Extension
.mp3
3) 3) 3)
.m4a, .aac , .mp4 , .3gp
.wma
.wma
.wav
.flac, .fla
.ac3
.dsf
.dff
.aiff, .aif
.m4a
o . g g
a . p e
3D
- -
- -
- -
- -
- -
- -
- -
- -
- -
- -
- -
- -
- -
Supported digital audio formats
The digital audio formats that this receiver can decode depend on the digital audio output jacks
of the connected device. This receiver supports the following audio formats. The words in
brackets are those indicated on the display panel.
Digital audio format
Dolby Digital [DOLBY D]
1)
Dolby Digital Plus [DOLBY D +]
1)
Dolby TrueHD [DOLBY HD]
Dolby Atmos – Dolby Digital Plus
1), 2)
[DAtmos]
1), 2)
Dolby Atmos – Dolby TrueHD [DAtmos]
DTS [DTS]
DTS-ES Discrete [DTS-ES Dsc]
DTS-ES Matrix [DTS-ES Mtx]
DTS 96/24 [DTS 96/24]
DTS-HD High Resolution Audio [DTS-HD
1)
HR]
1)
DTS-HD Master Audio [DTS-HD MA]
1)
DTS:X [DTS:X]
1)
DTS:X Master Audio [DTS:X MA]
1), 4)
DSD [DSD]
1)
Multi Channel Linear PCM [PCM]
1)
Audio signals are output in another format if the playback device does not correspond to the actual format.
For details, refer to the operating instructions of the playback device.
2)
Dolby Atmos is decoded as Dolby Digital Plus or Dolby TrueHD if the speaker pattern is set to 2.0, 2.1, 3.0, 3.1,
4.0, 4.1, 5.0 or 5.1.
3)
Available only when [SpeakerRelocation/PhantomSurroundBack] is set to [Type A] or [Type B].
4)
This format is not output to wireless headphones.
Maximum number of Connection with
decoded channels the receiver
5.1 COAXIAL/OPTICAL,
HDMI, eARC, ARC
7.1 HDMI, eARC, ARC
7.1 HDMI, eARC
3)
5.1.2, 7.1, or 7.1.2 HDMI, eARC, ARC
3)
5.1.2, 7.1, or 7.1.2 HDMI, eARC
5.1 COAXIAL/OPTICAL,
HDMI, eARC, ARC
6.1 COAXIAL/OPTICAL,
HDMI, eARC, ARC
6.1 COAXIAL/OPTICAL,
HDMI, eARC, ARC
5.1 COAXIAL/OPTICAL,
HDMI, eARC, ARC
7.1 HDMI, eARC
7.1 HDMI, eARC
3)
5.1.2, 7.1, or 7.1.2 HDMI, eARC
3)
5.1.2, 7.1, or 7.1.2 HDMI, eARC
5.1 HDMI
7.1 HDMI, eARC
– Continued on next page –
SYS SET