Location Of Main Parts - Sony DNE-1000 Maintenance Manual

5. Remove the two screws and the ENC bracket.
6. Remove the four screws and the VR fitting bracket.
7. Remove the four screws and the fader assembly.
BVWH 3x8
(GIZA TITE)
ENC bracket
BVWH 3x8
(GIZA TITE)
VR fitting bracket
Heat sink
8. Remove the three screws, and the pad and the upper
panel.
Upper panel
9. Install the pad and the upper panel in the reverse order
of the steps 1 through 8.
DNE-1000
BVWH 3x8
(GIZA TITE)
BV 3x10
(GIZA TITE)
Fader
assembly
BV 3x10
(GIZA TITE)
Upper panel assembly
PWH 3x6
Pad

2-3-2. Location of Main Parts

SW-871 board
Faders
CPU-207 board
2-3. BKNE-1011
2-3-1. Removal of Exterior Parts
2-3-2. Location of Main Parts
LD-77 board
Fader assembly
2-7(E)