Table of Contents
Advertisement
Available languages
Available languages
CHAPTER 2
SERVICE INFORMATION
2-1. DISASSEMBLY
2-1-1. Removal of the Cabinet (Upper)
(T)
Remove the three screws.
(5)
Remove the two screws.
(§)
Insert a flat blade screwdriver into slits (right and left) and
undo claws.
(
4
) Lift up the front of the cabinet and remove the cabinet to the
direction backward.
(
5
}
Remove the power sw.
(6)
Disconnect the
CN3
of power board.
(7)
Disconnect the CN12 of main board.
(§)
Disconnect the tape cord of keyboard.
2-1-2. Removal of the Main Board
(?)
Remove the two screws of the cartridge holder.
(5)
Remove the eight screws of the printed circuit board
2-1-3.
Removal of the Mechanical Deck
(?)
Remove the two screws of the plate.
(5)
Remove the four screws of the mechanical deck.
HB-501 P/501 F
2-1
Advertisement
Chapters
Table of Contents
