Bkne-1010; Initial Set-Up Of System - Sony DNE-1000 Maintenance Manual

1-11-2. BKNE-1010

1. Detach the upper panel assembly. (Refer to the section
2-2-1.)
2. Attach the plus probe of a digital voltmeter to TP2 (+5
V) and the minus probe of it to TPE3 (GND) on the
CPU-206 board.
3. Confirm that the voltage meets the following
specification.
+0.1
Specification : +5
_0
4. If the voltage does not meet the above specification,
refer to "2-1. Adjustment of Secondary Power Supply
Voltage (BKNE-1010)" in the maintenance manual
part 2 Vol. 1.
5. After the confirmation, detach the two probes of the
digital voltmeter and attach the upper panel assembly.
BVWH 3x8
(GIZA TITE)
DNE-1000
V
Upper panel assembly
BVWH 3x8
CN3
(GIZA TITE)
TPE3
(GND)
TP2
CPU-206 board
(+5 V)
1-11. Confirmation and Adjustment of Secondary Power Supply Voltage

1-12. Initial Set-up of System

For the initial set-up of system, refer to BZNE-1020
Operation Program.
1-12. Initial Set-up of System
1-31(E)