ABB ACS880-07CLC User Manual page 24

Emergency stop, stop category 0 (option +q951) for acs880-07clc drives

Hide thumbs Also See for ACS880-07CLC:

Table of Contents

24 Use of the safety function

3. If necessary, reset faults from the drive.

4. If necessary, close the main contactor/breaker.

5. Make sure that the drive receives the start signal.

6. You can now restart the drive.

For more information, see the hardware and firmware manuals.

Note: You must also reset the emergency stop safety relay [A640] with the emergency stop

reset button [S62] each time after you energize the relay. If you do not reset the relay, you

cannot close the main contactor/breaker.

Table of Contents