User Codes - Waeco AirCon ServiceCenter Operating Manual

Operation
8.3

User codes

It is possible to protect the air conditioning service station against
unauthorized access using personal user codes. If the function is
activated, the user code is requested after switching on. Without the
code, the station can not be started up. Up to 10 different users can be
created with individual codes.
8.3.1 Creating user codes
1. In the basic menu, use the cursor keys  or  to select "Other
selections":
2. Press ENTER to confirm.
3. Use the cursor key to select  "Service" and press ENTER to
confirm:
4. Enter password "9786" confirm and with ENTER to access the
administrator menu "ADM":
5. Enter administrator code "0000" (factory setting) and confirm with
ENTER:
I
NOTE
For security reasons, a new administrator code must be selected each
time, but not "0000" as this will deactivate the entire function.
Users can be created using the administrator code.
6. Enter new administrator code:
32
Short selection
Free selection
Other selections
ENTER-OK
Flushing
Reset scales.
Service.
ENTER-OK STOP-EXIT
Service.
Insert ADM Code
ADM AREA
Insert new code
VAS 581 001A
----
----
----