Table of Contents
Advertisement
Quick Links
Vacuum Block VCBL-G-K1
Operating Instructions
Note
The Operating instructions were originally written in German. Store in a safe place for future reference. Subject
to technical changes without notice. No responsibility is taken for printing or other types of errors.
Published by
© J. Schmalz GmbH, 04/20
This document is protected by copyright. J. Schmalz GmbH retains the rights established thereby. Reproduction of
the contents, in full or in part, is only permitted within the limits of the legal provisions of copyright law. Any mod-
ifications to or abridgments of the document are prohibited without explicit written agreement from
J. Schmalz GmbH.
J. Schmalz GmbH · Johannes-Schmalz-Str. 1 · 72293 Glatten, Germany · T: +49 7443 2403-0
schmalz@schmalz.de
EN-US · 30.30.01.02386 · 00 · 04/20
Advertisement
Table of Contents
Related Manuals for Schmalz VCBL-G-K1
Summary of Contents for Schmalz VCBL-G-K1
- Page 1 Any mod- ifications to or abridgments of the document are prohibited without explicit written agreement from J. Schmalz GmbH. J. Schmalz GmbH · Johannes-Schmalz-Str. 1 · 72293 Glatten, Germany · T: +49 7443 2403-0 schmalz@schmalz.de EN-US · 30.30.01.02386 · 00 · 04/20...
-
Page 2: Fundamental Safety Instructions
2 Fundamental Safety Instructions 2.1 Intended Use The vacuum block VCBL-G-K1 is built in accordance with the latest standards of technology and is delivered in a safe operating condition; however, hazards may arise during use. The vacuum block VCBL-G-K1 series is specially developed for use on the sealing plates of nesting machines. The vacuum blocks are used to secure the workpieces for mechanical processing. - Page 3 Intended use includes observing the technical data and the installation and operating instructions in this manual. 2.2 Non-Intended Use Schmalz accepts no liability for damages resulting from use other than as intended. In particular, the following are considered non-intended use: •...
-
Page 4: Technical Data
3 Design of the Vacuum Block Hose connection (vacuum) Suction plate Touch valve Friction pad Screen Sealing frame 4 Technical Data 4.1 General Parameters Parameter Unit Value Mass 0.34 Hose diameter Maximum ambient temperature °C 5 ... 45 4.2 Dimensions Part no. -
Page 5: Transport And Storage
1. Compare the entire delivery with the supplied delivery notes to make sure nothing is missing. 2. Damage caused by defective packaging or occurring in transit must be reported immediately to the carrier and J. Schmalz GmbH. 6 Installation 6.1 Installation Instructions... - Page 6 This procedure should be performed in particular for new workpieces that have never been machined before or for uncertain cases with regard to the holding force. Schmalz assumes no liability for damages resulting from slippage or release of workpieces due to faulty adjustment of machining parameters.
- Page 7 10 Warranty This system is guaranteed in accordance with our general terms of trade and delivery. The same applies to spare parts, provided that these are original parts supplied by us. Wearing parts are not covered by the warranty. 11 Maintenance and Cleaning 11.1 ...
-
Page 8: Spare And Wearing Parts
4 Sort and dispose of all components according to the country-specific regulations. For proper disposal, please contact a company specializing in the disposal of technical goods and in- struct the company to observe the applicable disposal and environmental regulations. Schmalz is happy to assist you in finding a suitable company.
Need help?
Do you have a question about the VCBL-G-K1 and is the answer not in the manual?
Questions and answers