Using The Adsp-21262 Ez-Kit Lite; Package Contents; Default Configuration - Analog Devices ADSP-21262 EZ-KIT Lite Manual

Evaluation system

Hide thumbs Also See for ADSP-21262 EZ-KIT Lite:

Table of Contents

Your ADSP-21262 EZ-KIT Lite evaluation system package contains the

following items.

• ADSP-21262 EZ-KIT Lite board

• Universal 7V DC power supply

• USB 2.0 cable

If any item is missing, contact the vendor where you purchased your

EZ-KIT Lite or contact Analog Devices, Inc.

The EZ-KIT Lite evaluation system contains ESD (electrostatic discharge)

sensitive devices. Electrostatic charges readily accumulate on the human

body and equipment and can discharge without detection. Permanent

damage may occur on devices subjected to high-energy discharges. Proper

ESD precautions are recommended to avoid performance degradation or

loss of functionality. Store unused EZ-KIT Lite boards in the protective

shipping package.

The ADSP-21262 EZ-KIT Lite board is designed to run outside your per-

sonal computer as a standalone unit. You do not have to open your

computer case.

When removing the EZ-KIT Lite board from the package, handle the

board carefully to avoid the discharge of static electricity, which may dam-

age some components.

and LEDs used in installation. Confirm that your board is set up in the

default configuration before using the board.

ADSP-21262 EZ-KIT Lite Evaluation System Manual

Using the ADSP-21262 EZ-KIT Lite

Figure 1-1

shows the default connector locations

1-3

Table of Contents

Do you have a question about the ADSP-21262 EZ-KIT Lite and is the answer not in the manual?