VERKADA INC
INSTALLATION
Mounting
This section takes you through how to mount the AC41.
1
Disconnect the Mount
To remove the wall mount, unscrew
the two security torx screws from the
inside.
2
Remove the Closet
Once the security screws are fully
removed, slide the wall mount down
and away from the main enclosure.
Install the Mount
3
Drill four 5/16" Ø holes into the wall.
Insert the drywall anchors into the
holes. Fasten the mount plate onto
the wall by installing the mounting
screws into the wall anchors.
Drill four 5/32" Ø holes into the wall.
Fasten the mount plate onto the wall
by installing the mounting screws into
the pilot holes.
5
CONFIDENTIAL
Verkada Inc. 405 E 4th Ave, San Mateo, CA, 94401
sales@verkada.com
AC41 — INSTALLATION MANUAL
All specifications are subject to change without notice.
Copyright © Verkada Inc . All rights reserved.