How To Adjust Trigger Delay; How To Quit Radar Video Adjustment Mode - Furuno FICE-100 Installation Manual

5.5 How to adjust Trigger delay

You may need to adjust trigger delay on FICE-100/FOIL-200. This is very much depending on
cable length between navigation radar and ScanStreamer. Measure distance of echo on
Navigation radar. Measure the same echo on FICE-100/FOIL-200, if there is difference in
distance you can use Trigger delay to adjust echoes on FICE-100/FOIL-200 display.

5.6 How to quit radar video adjustment mode

To quit radar video adjustment
mode:
1. Open Console, type
radartest off and press
<enter>
2. Radar test button
disappears.
3. Close Console.
20
Page