Browsing History Alarms; Table 5-9 Parameter Description Of Current Alarms Interface - Huawei OceanStor S5000 Series Routine Maintenance

OceanStor S5000 Series Storage System
Routine Maintenance
Procedure
Step 1 Log in to the OSM.
Step 2 On the main menu, click Alarm. In the navigation tree, click Current Fault or Current
Event.
Step 3 In the operation interface, view the alarms. The parameter description is shown in

Table 5-9 Parameter description of current alarms interface

Parameter
Alarm Time
Alarm ID
Alarm Name
Severity
Alarm Module
Alarm Cause
Solution
Alarm
Description
----End
Exception Handling
If an alarm that is displayed on the alarm interface, handle it by referring to the suggestion in
the alarm items.
If the fault persists, contact the technical support engineers.

5.10 Browsing History Alarms

This section describes how to browse history alarms through the OSM.
Issue 01 (2010-04-20)
NOTE
On the methods of setting the Trap IP, see the OceanStor S5000 Storage System Initial Configuration
Guide.
Description
This parameter indicates the time when an alarm event is generated. The
format is YYYY-MM-DD hh:mm:ss.
This parameter indicates the alarm ID.
This parameter indicates the alarm name.
This parameter indicates the alarm severity. The options are Critical,
Major, Minor, and Warning.
NOTE
You are recommended to browse the major alarms first and handle them in time to
ensure normal running of the system.
This parameter indicates the module that a alarm belongs to. The log module
include Device,iSCSI Target, RAID, System, WebUI, FC, Pool,
HyperCopy, HyperImage, HyperMirror, Agent, iSCSI Initiator, EPL,
and Coffer.
This parameter indicates the possible causes of an alarm.
This parameter indicates the recommended solution to the fault.
This parameter indicates the alarm description, for example, the location
details of the alarm module.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
5 Routine Maintenance Guide of the OSM
Table 5-9.
5-15