Checking The Status Of The D200 Disk Subrack - Huawei OceanStor S5000 Series Routine Maintenance

5 Routine Maintenance Guide of the OSM
Parameter
Running
Status
Temperature
Status
Type
Power
Version
Vendor
Production
Date
----End
Exception Handling
l
l
If the fault persists, contact the technical support engineers.

5.5 Checking the Status of the D200 Disk Subrack

This section describes how to check the D200 disk subrack through the OSM.
Reference Standard
l
l
5-8
Description
This parameter indicates the running status of the PEM. There are the
following options:
Normal: indicates that the power supply is running normally.
l
Power off: indicates that the power supply is not connected.
l
Fault: indicates that the power supply is faulty and cannot supply power
l
normally.
Absent: indicates that the power supply is absent.
l
Over Voltage: indicates that the input voltage of the power supply exceeds
l
the rated voltage of devices.
Under Voltage: indicates that the input voltage of the power supply is less
l
than the rated voltage of devices.
This parameter indicates the temperature status of the PEM. The status can
be Normal and Over Temperature.
NOTE
Over Temperature indicates that the PEM detects an overhigh temperature.
This parameter indicates the PEM type. There are two options: ACM and
DCNM.
This parameter indicates the version of the PEM software.
This parameter indicates the manufacturer of the PEM.
This parameter indicates the production date of the PEM.
If the running status of the PEM is Fault, see
OceanStor S5000 Series Storage System Alarm Reference.
If an alarm that is related to the PEM is displayed on the alarm interface, handle it by
referring to the suggestion in the alarm items.
No new alarms related to the disk subrack are displayed on the alarm interface.
The running status of all expander modules on the the disk subrack is Normal.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
OceanStor S5000 Series Storage System
"The PEM Status Is Abnormal" in the
Issue 01 (2010-04-20)
Routine Maintenance