Chapter 2: Setting Up The Instrument - Molecular Devices SpectraMax ABS User Manual

Chapter 2: Setting Up the Instrument

Before you unpack and set up the instrument, prepare a dry, flat work area that has sufficient
space for the instrument, host computer, and required cables. To provide access for
disconnecting power from the instrument, maintain a 20 cm to 30 cm (7.9 in. to 11.8 in.) gap
between the rear of the instrument and the wall. To ensure sufficient ventilation, do not block
the ventilation grids on the front and rear of the instrument.
The package contains the instrument and accessories to set up the instrument:
SoftMax Pro Software, product key, and installation guide
Instrument Installation Guide
USB computer connection cable
AC power adapter
For a complete list of the package contents, see the enclosed packing list.
Install the SoftMax Pro Software on the computer that operates the microplate reader. See the
SoftMax Pro Data Acquisition and Analysis Software Installation Guides .
The packaging is designed to protect the instrument during shipment. Tape is placed on the
cuvette door to protect the instrument from damage during shipment.
CAUTION! Do not touch or loosen screws or parts other than those specifically
designated in the instructions. Doing so could cause misalignment and possibly void the
warranty.
Note: Retain the shipping box and all packing materials for future transport needs.
CAUTION! When transporting the instrument, warranty claims are void if improper
packaging results in damage during transport.
CAUTION! Before unpacking the instrument, check the box for damage that occurred
during transportation. If any damage is noted, inform the supplier immediately and keep
the damaged packaging. Unless instructed otherwise by the supplier, do not continue
to unpack the instrument.
To unpack the instrument:
1. Open the top of the box.
2. Lift the accessories tool box and the instrument from the package, and then place the
instrument on a level surface.
3. Remove the packing material from both ends of the instrument, remove the instrument
from the plastic bag, and then set the instrument down carefully on a level surface.
5065390 C
2
13