Table of Contents
Advertisement
Installation and Setup
The 55i can be setup to share a network connection with another network
device. Power can be provided by the power adapter (optional
accessory), or by an 802.3af compliant network power source, or with a
PoE inline power injector (optional accessory). It can also be installed on a
desk or mounted on the wall. If your System Administrator has already
setup your phone, please refer to the 55i User Guide for call handling
information or contact to your System Administrator.
Direct or Shared Network Connection
The phone can be set up as a direct network connection to the Ethernet wall
jack or as a shared network connection as a pass-through if connecting a
computer or another network device.
Direct Network Connection
Located at the top of the phone are two fully switched 10/100 Mbps
Ethernet cable ports. The port marked with
phone to the network, as well as provide power to your phone (if
required). See the section
page 10
for more information.
Network Jack
(if Inline power provided,
do not install the power adapter)
Separate
Network
Jack
Other Network Devices
8
Model 55i IP Phone Installation Guide
"Connecting to the Network and to Power"
Ethernet
Cable
LAN
is used to connect the
Power Adapter
Connection
To Network
Power
Adapter
on
Advertisement
Table of Contents
