Camsat CDS-5IPmini Quick Start-Up

www.camsat.com
6. The recommended configuration settings:
a) Change the password to log on to the web panel (MANAGEMENT/PASSWORD SETTINGS).
b) Enter the radio transmission encryption password - a recommended coding WAP2-PSK
(WIRELESS/SECURITY SETTINGS)
c) Scanning for free, available channels - set the receiver to Wireless Client mode,
press Apply, then to scan the busy channels press Site Survey. With this information,
you will learn which channels in a given area are free or the least noisy. In the lack of free
channels it is permitted to set multiple radio modules on the same channel, but you must
select the channel with the weakest signal (below <85dB) (WIRELESS / BASIC SETTINGS)
7. Test the radio link.
The last step is to check the correctness of transmission between devices.
To check the information about connected CDS-6IPeco devices such as power
signal, connection time, speed, IP address, etc. you must enter the Status/Connections.
To view an updated list of current connections, click the Refresh button at the bottom
or press F5. The presence of transmitters MAC addresses list in the receiver indicates
the correctness of the radio configuration. To be sure disconnect transmitting unit from
the computer and connect the IP camera.
If the devices communicate with receiver it means that the radio connection is
properly configured and running. In the browser's address bar enter the IP address
of the camera and check the quality of image transmission. You can start to assembly
units at the facility.
These steps must be repeated for each individual
transmitting / receiving unit subsequently connecting them to your computer.
Full instructions can be found at: www.camsat-cctv.com/cds-5ipmini
MADE IN MADE IN
EU EU
POLAND POLAND
TECHNICAL
SUPPORT
Mon–Fr 8.00 AM–4.00 PM
tel.+48 52 387 36 58
IP cameras HD and UHD in the band 5.1 - 5.8 GHz
Newest processor
High power
transmission
1. Menu Structure - website panel
STATUS
Information (basic information about the module settings)
Connections (list of active wireless connections, together with the connection quality)
Statistics (information about the amount of received/transmitted data)
SYSTEM
Basic Settings (device name and region settings)
Network Settings (settings of the wireless system operation mode and TCP/IP v. 4 protocol)
Time Settings (time settings, NTP server settings)
WIRELESS
Basic Settings (basic configuration of the wireless connection: operating mode, channel,
output power)
Security Settings (safety settings, transmission coding)
Advanced Settings (advanced settings of the wireless connection)
WDS Settings (WDS settings related to the recommended operation mode: Bridge)
MANAGEMENT
Password Settings (access data settings)
Firmware Upgrade (firmware update – for advanced users)
Configuration File (saving and loading of the module configuration and resetting the module
to its factory settings)
TOOLS
System Log (history of changes/logging on the CDS-5IP mini module)
Full instructions can be found at: www.camsat-cctv.com/cds-5ipmini
mini
QUICK START-UP
ver. 1.1
External wireless, miniature system
to transmit images and sound for
4K and UHD resolution Small size
Low power
consumption