Related Manuals for Camsat CAM8h-AHD
Summary of Contents for Camsat CAM8h-AHD
- Page 1 CAM8h - AHD User’s Manual Hermetic wireless image transmission kit for AHD cameras in ISM 5.8 GHz www.camsat.com www.camsat.com...
- Page 2 Thank you for choosing the CAM8h-AHD. It is a new line of wireless systems in analog HD technology. The system is designed for wireless, analog transmission of video and sound in professional CCTV systems, wherever the need is of high-quality, stable video connection...
-
Page 3: Table Of Contents
Quick start 1. Installation........................2. Setting of operating channels..................3. Terminals description / controls ...................8 4. Technical data.........................9 5. Alarm function.......................10 6. Recommendations......................10 Warranty general conditions...................11 Used equipment storage....................12 Declaration of conformity....................13 CAM8H-AHD User’s manual MADE IN MADE IN POLAND POLAND... -
Page 4: Safety And Maintenance Tips
European New Approach Directives. The product is CE-marked. The device is suitable for use in the European Union. Do not approach the device when it is on at the distance below 30 cm. CAM8H-AHD User’s manual MADE IN MADE IN... -
Page 5: R&Tte Declaration Of Conformity
The antennas used for the transmission from this transmitter must be installed according to the instruction manual and they must be placed at least 30 cm from all persons. The transmitter is not compatible with another antenna nor transmitter. CAM8H-AHD User’s manual MADE IN MADE IN... -
Page 6: Basic Information
Easy to install and fully maintenance-free External cover with integrated directional antennas 2. Package contents Video/Audio transmitter with an integrated antenna – CAM8h-AH- D(Tx) Video/Audio receiver with an integrated antenna – CAM8h-AHD(Rx) Zip ties User Manual Declaration of Conformity 3. Before you begin... -
Page 7: Quick Start
Set the required channel as shown in the table and select the same channel for the trans- mitter and the receiver. Transmission of video and audio for the standard CVBS , PAL 960H Broadcast cameras AHD-M and AHD-L CAM8H-AHD User’s manual MADE IN MADE IN POLAND... -
Page 8: Setting Of Operating Channels
5.8 GHz and the distance of 600 m, an unobstructed space for a radio beam in the radius of at least 3.9 m (r in the dr point) must be provided. 3. Terminals description / controls : CAM8H-AHD User’s manual MADE IN MADE IN... -
Page 9: Technical Data
2. Due to the generation of noise it is not recommended to use low-cost and low-quality switching power supply other than the one dedicated by manufacturer, for example: CAMSAT ZS12 / 1A. 3. It is not recommended to connect the transmitter and receiver to a common power supply. It is allowed to connect several transmitters to one power supply and use a separate power supply for multiple receivers. - Page 10 Camsat grants a 24 month warranty for the CDS-5IPmini transmission kit 1. If the device is not be operating properly, make sure, before returning the device for servicing, that everything was done according to the operating manual 2.
- Page 11 The proper disposal of this device allows for preserving precious resources and avoid- ing the negative impact on health and environment, which may be endangered if the waste is handled improperly Improper waste disposal is subject to penalties provided for in the appropriate regulations. CAM8H-AHD User’s manual MADE IN MADE IN POLAND...
-
Page 12: Declaration Of Conformity
VIII Declaration of conformity CAM8H-AHD User’s manual MADE IN MADE IN POLAND POLAND... - Page 13 Hereby, CAMSAT Gralak Przemyslaw declares that the product series CAM8h-AHD meets the essential requirements and other relevant provisions of Directive 1999/5/WE. The device is CE marked, which indicates compliance with the guidelines of the Directive. The device can be sold and used for transmission in the 5 GHz band.
Need help?
Do you have a question about the CAM8h-AHD and is the answer not in the manual?
Questions and answers