Subscribe to Our Youtube Channel
Related Manuals for Camsat CDS-5IPmini
Summary of Contents for Camsat CDS-5IPmini
- Page 1 User manual External wireless , miniature system to transmit images and sound IP cameras HD and UHD in the band 5.1 - 5.8 GHz www.camsat.com www.camsat.com...
- Page 2 Thank you for choosing the CDS-5IPmini. We trust that its unique features will come in very handy. Please, read this instruction manual to ensure safe operation and maximise efficiency of the device. The contents of this manual comprise proprietary information of CAMSAT and are intended only for use by purchasers of the equipment described herein.
-
Page 3: Table Of Contents
Table of contents Safety and maintenance tips....................Contents..........................Basic information....................... 2. Description of the connectors and LED indicators..............System configuration......................1. Logging into the system....................2. Factory settings......................... 3. Menu structure........................4. Module assembly on the pole................... 5. Connection to the system....................6. -
Page 4: Safety And Maintenance Tips
Note: This device can operate within the frequency and power ranges which might be contradictory to laws applicable in selected countries. The CDS-5IPmini module is maintenance-free. We recommend installing it on a stable structure and connecting its power cables in a manner which would prevent them from being accidentally damaged by the operator or any bystanders. - Page 5 (Directive 1999/5/CE of the European Parliament and the Council of Europe, March 1999). The CDS-5IPmini module is compliant with provisions related to the safety in using electrical devices. Observe the following guidelines: the power outlet must be earthed in compliance with applicable provisions,...
-
Page 6: Basic Information
II Contents 1. Basic information The CDS-5IPmini device is a small wireless module for video streaming from IP HD and 4K (5.1-5.8 Ghz) megapixel cameras. The most important features of the CDS-5IPmini: device is intended for streaming the signal from high-resolution IP cameras... -
Page 7: System Configuration
1. Logging into the system To log into the wireless CDS-5IPmini module, set the computer IP address in the same subnet as the CDS-5IPmini device (default IP address: 192.168.1.1). Start your web browser (we recommend the Internet Explorer) and type in the IP address of the module. -
Page 8: Module Assembly On The Pole
Remember to loosen the mounting clamps with a screwdriver before pushing them through the openings in the device body. Stably fix the CDS-5IPmini module to the pole, firmly tightening the bolts of the moun- ting clamps. The clamps are suitable for the assembly on poles with diameters between 32 and 70 mm. -
Page 9: Connection To The System
5. Connection to the system. Option 1 Plug the power cord with the RJ45tip to LAN connector in CDS-5IPmini module and the other end into the "POE" connector splitter. Connect computer / IP camera / recorder to "LAN" connector in the manifold by network cable. - Page 10 Connect the CDS-5IPmini device to the computer according to the instructions in pt. 5. Start your Internet browser, for instance the Internet Explorer. Type the IP address of the CDS-5IPmini device in the address bar (default: 192.168.1.1). The following logging menu should be displayed on the screen: If the browser returns the error, go back to point 1 and make sure that the IP address is correct.
- Page 11 Select the Static IP to use the static IP address and type in the new IP address for the CDS-5IPmini device (IP Address). The IP address must be in the same subnet as the computer. Subsequently, enter the subnet mask (Subnet Mask) and the gateway IP address (Gateway IP Address).
- Page 12 The next step is setting the basic parameters of the network connection. Select the Wireless menu and, then, the Basic Settings tab. The following screen will be displayed: For the Operation Mode parameter, select the Bridge, which is a default option, recom- mended for the use of IP cameras.
- Page 13 The last step is checking whether the transmission between the devices proceeds correctly. To check the information about the connected CDS-5IPmini devices, such as the MAC address, signal strength, connection time, IP address, etc., open the Con- nections tab in the Status menu. To display the up-to-date list of the current connections, click the Refresh button.
-
Page 14: Scanning The Usage Of Operation Channels
(CDS-5IPmini, IP cameras, routers, recorders). 7. Scanning the usage of operation channels. The CDS-5IPmini modules allow scanning the ether to detect frequencies used in the area. This tool comes in very handy while setting the operation channel. Thanks to it, we know which channels to omit, and which are free and can be used for the wireless transmission of signals from IP cameras. -
Page 15: Radio Transmission Security
AES algorithm and a password will be required for communication. If the WPA data encryption method is selected, a network key is required, the same for all the CDS-5IPmini units. The user can select the encryption key type in the Data Encryption menu: 64-bit WEP: consists of no more than 10 hexadecimal characters. -
Page 16: External Antenna Connection
9. External antenna connection. If the WPA data encryption method is selected, a network key is required, the same one for all the CDS-5IPmini units. The user can select the encryption key type in the Data Encryption menu: The CDS-5IPmini module is available in two versions:... - Page 17 11. Table with technical parameters. TECHNICAL PARAMETERS Video and sound IP camera resolution support 4K, UHD, HD1080p, HD1080i, HD720p, PAL/NTSC and others Wireless transmission Estimated bandwidth (LoS) 1 km 1,5 km 2 km or 2 km or 2 km Maximum output power 24dBm @ MCS0 Sensitivity FCC: 5725-5850 MHz...
-
Page 18: Instructions For Combining The Latest Modules Cds-5Ip Mini With Previous
CDS-5IPmini CDS-5IP CDS-5IP Example 2: Use of the latest CDS-5IPmini module as a receiving point and adding additional transmitting points using modules CDS-5IP and the CDS-5IPmini . switch the receiver CDS-5IPmini to the operation mode "AP", switch all transmitting points CDS-5IP to operation mode "SLAVE", switch a transmitting point CDS-5IPmini to the operation mode "CLIENT". - Page 19 Basic Settings tab. Then set the Wireless Mode parameter to MASTER. The next step is to set the wireless network name (SSID). The default name is "CAMSAT", change it to a name that is refers to configurated location. Confirm changes with the Apply button.
-
Page 20: General Warranty Terms
Camsat grants a 24 month warranty for the CDS-5IPmini transmission kit 1. If the device is not be operating properly, make sure, before returning the device for servicing, that everything was done according to the operating manual 2. -
Page 21: Device Disposal
V Device disposal The mark presented to the left informs that this electrical or electronic device, after its use has ended, cannot be thrown together with household refuse The device should be delivered to a specialised collection point Detailed information about the closest collection point is available from local authorities. - Page 22 Hereby, CAMSAT Gralak Przemyslaw declares that the product series CDS-5IPmini, meets the essential requirements and other relevant provisions of Directive 1999/5 / EC. The device is CE marked, which indicates compliance with the guidelines of the Directive. The device can be sold and used for transmission in the 5 GHz band.
Need help?
Do you have a question about the CDS-5IPmini and is the answer not in the manual?
Questions and answers