Profim WALL IN Assembly Instructions Manual page 13

7. Diagram showing the installation of stabilising hooks and
the method for joining pouffes, armchairs and tables together.
7.1. LIST OF COMPONENTS
A hook set consists of:
2 hooks, 2 plastic flanged sleeves,
2 screws for the attachment of hooks,
2 screws locking the hook and 2 threaded rods.
1 set of stabilising hooks is used to secure the two
neighbouring components together.
7.3. INSTALLATION OF HOOKING BOLTS
+
Install the threaded rods into the hooking bolts and then,
using the Allen wrench, install the 2 hooking bolts in the outer
openings in the wall of the second piece of furniture's body.
Adjustment of the unit: first adjust the position of the walls, then the front legs of the pieces of furniture,
so that there is no play between the feet and the ground.
7.2. INSTALLATION OF HOOKS
Place the plastic flanged sleeves into the hook openings.
Using the 2 screws and the Allen wrench attach the 2 hooks
in the outer openings in the wall of the first piece of furniture's body.
7.4. METHOD FOR JOINING POUFFES,
ARMCHAIRS, TABLES
Join the 2 pieces of furniture together as shown on the diagram.
13