Profim WALL IN Assembly Instructions Manual page 12

Hide thumbs

page of 40

/ 40
Bookmarks

Available languages

5. Diagram showing the installation of corner connectors (D)

in walls and pouffes, armchairs and table bodies.

5.1. ATTACHMENT OF CONNECTOR TO THE WALLS

Position the 2 walls at right angle. Using the screws lightly attach

the connector to the walls positioned in the previous step.

After positioning the walls vertically secure the entire assembly

using an Allen wrench.

6. Diagram for joining the pouffe connectors/tables and armrests

with pouffes, armchairs and tables using catches.

6.1. INSTALLATION OF ADJUSTABLE COMPONENTS

Using the 2 screws lightly attach each of the 2 hooks to the piece of furniture's

body. After setting the hooks in identical position in relation to the piece

of furniture's body secure the assembly using an Allen wrench.

Each set of catches (E) consists of 4 fixed elements designated in the figure using the (I) symbol, which are installed by the manufacturer in the pouffe connectors

(C1, C2), tables (B1, B2) and armrests (P1, P3) and the 4 unassembled moveable hooks supplied together with installation elements designated in the figure

using the (II) symbol, which are installed (and adjusted depending on the thickness of the covering) on the pouffes/armchairs/tables (10, 20, 20, B, BW1,

BW2, 11, 21, 31, 12, 22, 32).The pouffe connectors (C1, C2), tables (B1, B2) and armrests (P1, P3) are only used in conjunction with neighbouring

pouffes/armchairs (10, 20, 30, 11, 21, 31, 12, 22, 32) attached on both sides or with the table (B, BW1, BW2).

element

2 x

(II)

4 x

5.2. ATTACHMENT OF THE CONNECTOR

TO THE PIECE OF FURNITURE'S BODY

Using the 4 screws lightly attach the connector to the piece of furniture's

body.* After positioning the connector in the correct position, secure

it to the body using an Allen wrench..

* In piece of furniture body variant 13 attach 2 connectors.