Profim WALL IN Assembly Instructions Manual page 11

3. Diagram showing the installation of feet (B) in walls.
3.1. INSTALLATION OF FEET IN LEG WALLS
Screw the foot into the wall leg.
4. Diagram showing the installation of single connector (C)
in walls and pouffes, armchairs and table bodies.
4.1. ATTACHMENT OF CONNECTOR TO WALLS
* Using the 2 screws lightly attach the connector to the wall.
After setting the connector in the vertical position secure it
to the body using an Allen wrench. Repeat the same operation
for the second connector. .
* In the W12 wall variant attach 4 connectors.
3.2. LEG HEIGHT ADJUSTMENT
B
element
4.2. ATTACHMENT OF CONNECTORS
C
element
It is possible to adjust the height of the wall using the leg pipe*.
* the leg pipe is installed by the manufacturer.
TO THE PIECE OF FURNITURE'S BODY
Using the 4 screws lightly attach the connector to the piece
of furniture's body. After positioning the connector in the correct
position, secure it to the body using an Allen wrench.
+
B
element
C
element
11