Software Installation And Operation Preparation; Micromeritics Custom Recipe Installation - Micromeritics Cirrus AutoChem 2920 Installation Instructions Manual

S I
OFTWARE NSTALLATION AND
Ensure the MKS Cirrus Mass Spectrometer is powered on before installing the software
so that the software can auto-detect the instrument. Powering on the MKS Cirrus Mass
Spectrometer only allows communications between the instrument and software. See
Set Up and Prepare for Operation on page 32
MKS Cirrus Mass Spectrometer pumps and heaters.
Two software applications that must be installed for the Mass Spectrometer hardware to work
effectively with specific Micromeritics analyzers:
Required Software Applications
Application Name
Process Eye Professional
Micromeritics Custom Recipe
disk
M
ICROMERITICS
1. Insert the Micromeritics Custom Recipe installation media into the media drive.
2. Go to Start > All Programs > MKS RGA Applications > Tools > User Setup.
3. The Setup Wizard displays. Click Next.
4. On the Install Recipes window, click
Micromeritics-Cirrus Interface Installation Instructions
292-42805-00 (Rev C) — Nov 2016
Description
Use the installation disk labeled RGA Software to install the
Process Eye Professional software. All supporting
documentation is located on the MKS User Manuals disk.
After installation of the Process Eye Professional software, a
user setup utility is used for installation of the Micromeritics
Custom Recipe disk.
C R
USTOM ECIPE
Have

Software Installation and Operation Preparation

O
PERATION
to learn how to power on the
The MKS Process Eye Professional software
must be installed prior to installation of the Micro-
meritics Custom Recipe disk.
I
NSTALLATION
Disk.
P
REPARATION
28