Pakedge WK-1 Quick Start Manual page 2

802.11ac 2x2 wireless ap with bakpak lite

Hide thumbs Also See for WK-1:

WK-1 features

• 802.11ac 2x2 Wireless AP with BakPak Lite

• Built-in 2×2 internal antennas

• Powered by PoE+ or 12V AC power adapter (included)

• 2 LAN ports for network extensions

• BakPak Lite built in: Manage device from the standard BakPak interface

(firmware v1.31 and later only)

• For more detailed instructions, refer to the WK-1 User Guide (

System requirements

• Windows or Mac PC with an Ethernet interface

Default settings and credentials

• Operation mode: Access Point

• IP address: If no DHCP server is detected, the default IP address will be

automatically set to 192.168.1.250.

• Username/Password (default): pakedge/pakedgea

• SSIDs (default): Pakedge2.4-1 and Pakedge5-1, security/password: WPA2-PSK/

pakedgewireless

• Guest SSIDs (default): PakedgeGuest2.4 and PakedgeGuest5, security/password:

WPA2/pakedgeguest

• Transmit power: Default is 13 dBm for 2.4 GHz and 18 dBm for 5 GHz.

pkdge.co/wrx-ug