Quick Setup - inbody J30 User Manual

D. Quick Setup
1. The InBody J30 automatically starts booting when it is turned on. While booting, it performs a self
weight calibration.
* While booting (about 5 minutes), make sure there is nothing on top of the footplate. Please do not stand on the footplate, or
place objects on the footplate.
2. Press the [MODE] button on the screen, which appears when no one is on the footplate.
3. Use the left or right arrow buttons ( ◀, ▶ ) to navigate to an item to set up, then use the up or down arrow
buttons (▲, ▼) to select a sub-item to change. Press the 'EXIT' button to go to the confirmation screen.
Press the 'ENTER' button to save the changes or press the 'EXIT' button to discard the changes.
❶ ❷ ❸ ❹
9