Advertisement
LOCATION AND FUNCTION OF CONTROLS
3
9
12
MODE
AF
BAND
PTY
MUTE
8
4
6 6
1. RELEASE BUTTON
Press the REL button to release the front control panel from the unit chassis, then
pull it up a little to remove from the unit chassis.
When the front control panel is removed the LED indicator flashes.
2. SEL BUTTON (Select) AND VOL CONTROL BUTTON
a) Press the SEL button briefly, it is activated as selecting each mode of E. VOL.
-> VOLUME ->BASS ->TREBLE -> BALANCE -> FADER ->
When selecting a desired audio mode, rotate the VOL+ or VOL- button to adjust the
audio effect.
In each mode, the waiting time is about 5 seconds, and after this time, it returns to
the last display mode .
The control mode of E.VOL is operated with following numeric display.
- VOL: (MIN)00, 01,......46, 47(MAX).
- BASS/TRE: -07, -06,...,00,...+06,+07
- BAL: 0LR9, 1LR9, ..., 9LR9,..., 9LR1, 9LR0
- FAD: 0FR9,1FR9, ..., 9FR9,..., 9FR1, 9FR0
b) Press SEL button and hold for more than 2 seconds to turn on TA SEEK/TA ALARM
mode, then press SEL button shortly and repeatedly to select PI SOUND/PI MUTE,
RETUNE L/RETUNE S, MASK DPI/MASK ALL, BEEP ON/BEEP OFF, USER SET
(FLAT/CLASSIC/ROCK/POP),VOL LAST/VOL DEFA , STEREO/MONO(in RADIO
mode), LOUD OFF/LOUD ON,DX/LOCAL (in RADIO mode), CLK ON/CLK OFF,
CLK 12/24 mode. After selecting the desired mode, rotate the VOL- or VOL+ button
to select one setup item of the desired mode.
2
11
TA
PUSH
SEL
-
VOL
+
1/
2/INT
7
14
15
23
24
5
3/RPT
4/RDM
5/-10
6/+10
16
17
18
19
SD
22
Page 1
1
REL
AUX
AS/PS
CLK
13
10
20
21
Advertisement
